ELECTROLUX SB

Electrolux Refrigerator Error SB: Sabbath Mode Active

Clear meaning, realistic next steps, and safe guidance without turning the page into a long repair manual.

What it means

The refrigerator is in Sabbath Mode (Shabbos Mode). This mode disables the interior lights, display, and automatic door alarms for religious observance. The compressor and cooling system continue to operate normally — food stays at the correct temperature. SB SB displayed on both the freezer and refrigerator zones confirms Sabbath Mode is active on the full unit.

Severity

Low - usually safe to check with basic user-accessible cleaning or inspection on the Electrolux refrigerator.

Can you fix it yourself?

Yes — DIY-safe

Most likely cause

Sabbath Mode deliberately activated before a religious observance period

Also displayed as SB SB, SB on some models.

Estimated time for safe first checks: 2–5 min.

Step-by-Step DIY Fix Guide

  1. SAFETY: SB / SB SB is not a fault — the refrigerator is cooling normally.
  2. To exit Sabbath Mode, hold the Sabbath Mode button (or the designated button combination for your model) for 3–5 seconds until the SB display clears.
  3. On models without a dedicated Sabbath button, the common exit sequence is pressing and holding both the Freezer Temperature and Refrigerator Temperature buttons simultaneously for 5 seconds.
  4. Consult your model's user manual for the exact button combination — sequences vary between model lines.
  5. Once exited, the display will return to showing temperatures and interior lighting will reactivate when the door is opened.

If the warning comes back after restart

  • If the door closes normally but the warning keeps returning, the latch or switch path becomes more likely than a simple alignment issue.
  • If the warning returns immediately after a clean restart, the sensor or wiring path becomes more likely than a one-time glitch.
  • SB / SB SB cannot be cleared after following the correct button sequence from the user manual

What This Error Means

Error SB on your Electrolux refrigerator means: The refrigerator is in Sabbath Mode (Shabbos Mode). This mode disables the interior lights, display, and automatic door alarms for religious observance. The compressor and cooling system continue to operate normally — food stays at the correct temperature. SB SB displayed on both the freezer and refrigerator zones confirms Sabbath Mode is active on the full unit. Also displayed as SB SB on some Electrolux models. The refrigerator's self-diagnostic system has detected this condition and triggered the alert.

The most frequent cause is sabbath mode deliberately activated before a religious observance period. Work through the causes and fix steps below in order — most Electrolux refrigerator alerts are resolved without a service call.

Error SB is DIY-safe. No special tools are required and the fix typically takes under 10 minutes. Follow all steps in sequence.

Sabbath Mode is designed for observant Jewish households. The refrigerator cools normally in this mode — only the lights, display, and door alarm are suppressed. Exiting the mode requires a specific button sequence; consult the user manual for your model number.

Most Likely Cause by Symptom

The Electrolux refrigerator may stop, pause, or refuse to complete the cycle normally.

Likely cause: Sabbath Mode deliberately activated before a religious observance period

Check first: SAFETY: SB / SB SB is not a fault — the refrigerator is cooling normally.

The appliance may fail to start because the door or lock state cannot be confirmed.

Likely cause: Sabbath Mode accidentally activated by pressing the correct button combination while cleaning the display panel

Check first: To exit Sabbath Mode, hold the Sabbath Mode button (or the designated button combination for your model) for 3–5 seconds until the SB display clears.

Common Causes

  • Sabbath Mode deliberately activated before a religious observance period
  • Sabbath Mode accidentally activated by pressing the correct button combination while cleaning the display panel
  • Child pressing buttons that triggered the mode inadvertently

What Not to Do

  • Do not unplug the refrigerator to exit Sabbath Mode without checking your user manual first — some models reactivate Sabbath Mode automatically after a power cycle

Model and Display Variation Notes

Model-family notes

  • Electrolux refrigerator display wording and code formats can vary by series.
  • If your model behaves differently, check the owner manual before trying any deeper maintenance step.
  • Some models may display the same fault as SB SB, SB.

Display and panel differences

  • Some control panels show this issue as SB SB, SB instead of only SB.
  • Panel wording and whether the code appears with letters, numbers, or a longer variant can differ by model family.

Parts, Tools and Service Options

Manual and model check

Check your exact model and manual before ordering any Electrolux refrigerator parts.

This section stays model-first because exact manual and parts matching matters more than a generic replacement suggestion here.

When Not to Keep Troubleshooting

SB / SB SB cannot be cleared after following the correct button sequence from the user manual

  • The refrigerator is not cooling while SB is displayed — Sabbath Mode should not disable the compressor

How to Prevent It Recurring

  • Note the Sabbath Mode activation sequence in a location where family members can reference it — accidental deactivation during religious observance requires knowing how to reactivate it quickly

Related Error Codes

Extra notes

  • This page is based on Electrolux support material and stays conservative where model-specific guidance may vary.
  • The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.

Source and model notes

Last reviewed: 2026-04-09

Based on: Based on Electrolux support material and edited into consumer-safe guidance for the exact code family on this page.

View Electrolux US Official Support

Model coverage note: Electrolux refrigerator code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.

Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.

Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.