Full Error Code List
Fisher & Paykel oven error codes
Use this page when you already know the display code or want to compare Fisher & Paykel oven meanings quickly by severity.
How to use this list
Use the table to confirm the exact code, then open the detail guide for the safest first checks, model notes, and next-step options.
What the list is best for
- Matching the exact display code before you act.
- Comparing severity and meaning side by side.
- Spotting closely related warnings that users often confuse.
What happens on the detail page
- Quick answer and severity guidance.
- Symptom-based first checks where the content supports it.
- Model and display notes plus trust and source context.
Fisher & Paykel oven code table
Scan by code, meaning, and severity, then open the exact detail page when you need step-by-step guidance.
Common symptom shortcuts
These clusters give users another way into the list when they know the symptom but not the code.
Door, latch, and lock warnings
- F2 - During a pyrolytic self-cleaning cycle, the oven cavity temperature has exceeded safe limits. The oven will lock the door and halt the cycle automatically. This is a safety cut-out — do not attempt to force the door open.
- F7 - The door locking mechanism has not engaged or released correctly. This can occur at the start or end of a self-clean cycle, or if the latch is obstructed. The oven may refuse to start a self-clean cycle or may leave the door locked after one.
Sensor and temperature faults
- C1 - The oven cavity temperature has exceeded 305 °C (581 °F) outside of a self-clean cycle. C1 is a critical safety cut-out — the oven will switch all heating off immediately and lock out further operation until the fault is cleared by a technician.
- F2 - During a pyrolytic self-cleaning cycle, the oven cavity temperature has exceeded safe limits. The oven will lock the door and halt the cycle automatically. This is a safety cut-out — do not attempt to force the door open.
- F3 - The oven cavity has exceeded 305 °C (581 °F) during normal cooking — outside the self-clean mode. This indicates the temperature control system has failed and the oven cannot regulate heat properly. The oven will shut down for safety.
Control board and electronics warnings
- C1 - The oven cavity temperature has exceeded 305 °C (581 °F) outside of a self-clean cycle. C1 is a critical safety cut-out — the oven will switch all heating off immediately and lock out further operation until the fault is cleared by a technician.
- F1 - The temperature around the oven's electronics has exceeded 85 °C (185 °F). This usually happens when the oven is installed in a very hot kitchen or when cabinet ventilation is blocked, allowing heat to build up around the control electronics.
- F2 - During a pyrolytic self-cleaning cycle, the oven cavity temperature has exceeded safe limits. The oven will lock the door and halt the cycle automatically. This is a safety cut-out — do not attempt to force the door open.
Common guides to open next
C1 fix guide
C1 - The oven cavity temperature has exceeded 305 °C (581 °F) outside of a self-clean cycle. C1 is a critical safety cut-out — the oven will switch all heating off immediately and lock out further operation until the fault is cleared by a technician.
F1 fix guide
F1 - The temperature around the oven's electronics has exceeded 85 °C (185 °F). This usually happens when the oven is installed in a very hot kitchen or when cabinet ventilation is blocked, allowing heat to build up around the control electronics.
F2 fix guide
F2 - During a pyrolytic self-cleaning cycle, the oven cavity temperature has exceeded safe limits. The oven will lock the door and halt the cycle automatically. This is a safety cut-out — do not attempt to force the door open.
F3 fix guide
F3 - The oven cavity has exceeded 305 °C (581 °F) during normal cooking — outside the self-clean mode. This indicates the temperature control system has failed and the oven cannot regulate heat properly. The oven will shut down for safety.