Step-by-Step DIY Fix Guide
- SAFETY: No safety risk — press Pause before opening the door.
- Open the door and remove approximately one-third of the load.
- Set the removed items aside to wash in a separate cycle.
- Close the door and restart the cycle.
If the code comes back
- The too-full message appears on a load that appears well within capacity — may indicate a faulty load sensor
What This Error Means
The too FUL fault code on your Fisher & Paykel Washing Machine means: The washer detects that the drum is overloaded. An overloaded washer cannot tumble or agitate the laundry effectively, resulting in poor wash results and stress on the motor and suspension. This fault may also appear as too full on some models.
The most common cause is: too many items loaded into the drum — exceeds the rated capacity.
This fault is user-fixable in many cases. No professional service needed for an overload message — this is entirely a user-loading issue.
What users usually notice before this code
Fisher & Paykel washing-machine warnings like this often appear after a fill problem, a drain slowdown, a badly balanced load, or a startup sequence that did not settle cleanly.
Common misdiagnoses
- Assuming the display code proves one exact failed part before the safe first checks are done.
- Blaming a pump or valve first when a blocked path, filter, hose, or household plumbing issue is still possible.
Most Likely Cause by Symptom
The Fisher & Paykel washing machine may stop, pause, or refuse to complete the cycle normally.
Likely cause: Too many items loaded into the drum — exceeds the rated capacity
Check first: SAFETY: No safety risk — press Pause before opening the door.
Common Causes
- Too many items loaded into the drum — exceeds the rated capacity
- Heavy, water-absorbent items (towels, denim, bedding) packed too tightly
What Not to Do
- Do not force extra items into the drum — overloading causes premature wear on the motor, bearings, and suspension
Model and Display Variation Notes
Model-family notes
- Fisher & Paykel washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as too FUL, too full.
Display and panel differences
- Some control panels show this issue as too FUL, too full instead of only too FUL.
- Panel wording and whether the code appears with letters, numbers, or a longer variant can differ by model family.
Parts, Tools and Service Options
Manual and model check
Check your exact model and manual before ordering any Fisher & Paykel washing machine parts.
This section stays model-first because exact manual and parts matching matters more than a generic replacement suggestion here.
When Not to Keep Troubleshooting
The too-full message appears on a load that appears well within capacity — may indicate a faulty load sensor
How to Prevent It Recurring
- Fill the drum to about three-quarters full — laundry should be able to tumble freely, not packed solid
Related Error Codes
Helpful guides for this problem
Guide
What to check before replacing a washing machine door lock
What to rule out before ordering a new door lock, from alignment and load issues to startup problems that mimic a latch fault.
Guide
Most common Samsung washing machine error codes and what to check first
The Samsung washer codes people see most often, with the first checks that usually make sense before you start chasing parts.
Guide
Washing machine features that matter more than marketing extras
Which washing-machine features are worth caring about in real life, and which ones mostly exist to pad the sales pitch.
When not to keep pushing DIY troubleshooting
Use the code page for one careful first pass, then stop if the same warning returns or the appliance still cannot get back to normal operation.
Extra notes
- This page is based on Fisher & Paykel support material and stays conservative where model-specific guidance may vary.
- The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.
Source and model notes
Last reviewed: 2026-04-09
Based on: Based on Fisher & Paykel support material and edited into consumer-safe guidance for the exact code family on this page.
View Fisher & Paykel North America Support
Model coverage note: Fisher & Paykel washing machine code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.
Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.
Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.