Frigidaire dishwasher
Frigidaire dishwasher error codes
Find Frigidaire dishwasher error code meanings, likely causes, and safe first-step guidance for drain, leak, and fill issues.
Errors
5
High severity
0
Browse all 5 dishwasher codes
See the full Frigidaire dishwasher error code list with code, meaning, severity, and direct links to the detail pages.
Common Frigidaire dishwasher codes
CL
Frigidaire Dishwasher Error CL: Door Not Closed or Not Latched
Frigidaire dishwasher error CL usually means the door is not fully closed or latched.
Open CL guide
Hd
Frigidaire Dishwasher Error Hd: Heat Delay While Water Warms
Frigidaire dishwasher error Hd usually means the dishwasher is pausing while the wash water heats to the expected temperature.
Open Hd guide
i20
Frigidaire Dishwasher Error i20: Dishwasher Did Not Drain Properly
Frigidaire dishwasher error i20 usually means the machine did not drain water from the tub within the expected time.
Open i20 guide
i40
Frigidaire Dishwasher Error i40: Filter or Sump Is Clogged
Frigidaire dishwasher error i40 usually means water flow through the filter or sump area is restricted.
Open i40 guide
PF
Frigidaire Dishwasher Error PF: Power Failure — Cycle Interrupted
The dishwasher lost electrical power during a cycle — either from a household power outage, a tripped breaker, or the machine being unplugged. PF is not a fault with the dishwasher; it is a notification that the previous cycle did not complete normally.
Open PF guide
Symptom entry points
Drain and standing water problems
Leaks, fill, and water-path issues
- Hd - Frigidaire dishwasher error Hd usually means the dishwasher is pausing while the wash water heats to the expected temperature.
- i20 - Frigidaire dishwasher error i20 usually means the machine did not drain water from the tub within the expected time.
- i40 - Frigidaire dishwasher error i40 usually means water flow through the filter or sump area is restricted.
Door, latch, and lock warnings
- CL - Frigidaire dishwasher error CL usually means the door is not fully closed or latched.
Model-family guidance
What can vary by model
- Frigidaire dishwasher display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as CL, Cd.
- Some models may display the same fault as Hd, HO.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Frigidaire dishwasher error codes?
Start with the dishwasher overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Frigidaire dishwasher codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Frigidaire support or a qualified technician.
Which dishwasher codes are covered in this section?
This Frigidaire dishwasher section currently includes CL, Hd, i20, i40, PF and related variants based on the current content set.