Full Error Code List
Gaggenau dishwasher error codes
Use this page when you already know the display code or want to compare Gaggenau dishwasher meanings quickly by severity.
How to use this list
Use the table to confirm the exact code, then open the detail guide for the safest first checks, model notes, and next-step options.
What the list is best for
- Matching the exact display code before you act.
- Comparing severity and meaning side by side.
- Spotting closely related warnings that users often confuse.
What happens on the detail page
- Quick answer and severity guidance.
- Symptom-based first checks where the content supports it.
- Model and display notes plus trust and source context.
Gaggenau dishwasher code table
Scan by code, meaning, and severity, then open the exact detail page when you need step-by-step guidance.
Code
Meaning
Severity
Page
E01
There is a heat pump motor circuit fault at the main control board.
high severity
E04
Your dishwasher has detected faulty (heater) electronics in the self-test.
high severity
E05
There is a wash arm diverter circuit in main control board fault/error.
high severity
E14
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
medium severity
E15
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
medium severity
E16
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
medium severity
E18
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
medium severity
E22
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
low severity
E23
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
medium severity
E24
The dishwasher is not draining properly due to the drain filter being blocked.
low severity
E25
The drain pump is blocked or the drain pump cover is loose or missing.
low severity
E0100
There is a heat pump motor circuit fault at the main control board.
high severity
E0105
Your dishwasher has detected faulty (heater) electronics in the self-test.
high severity
E0106
There is a wash arm diverter circuit in main control board fault/error.
high severity
E3000
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
medium severity
E3100
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
medium severity
E3200
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
medium severity
E3300
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
medium severity
E6101
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
low severity
E6102
The drain pump is blocked or the drain pump cover is loose or missing.
low severity
E6103
The dishwasher is not draining properly due to the drain filter being blocked.
low severity
E6160
PowerControl™ (Controlled Lower Spray Arm) reference position not found.
medium severity
E9240
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
low severity
H01
This is not an actual error code, but an indication that the start-up timer menu has been accessed to delay the start of the cycle, with H01 for a 1-hour delay and h02 for a 2-hour delay, and so on.
medium severity
Common symptom shortcuts
These clusters give users another way into the list when they know the symptom but not the code.
Drain and standing water problems
- E22 - The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
- E23 - There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
- E24 - The dishwasher is not draining properly due to the drain filter being blocked.
Leaks, fill, and water-path issues
Door, latch, and lock warnings
Common guides to open next
E01 fix guide
E01 - There is a heat pump motor circuit fault at the main control board.
E02 fix guide
E02 - There is a main control board relay fault/error.
E03 fix guide
E03 - There is a main control board relay fault/error.
E04 fix guide
E04 - Your dishwasher has detected faulty (heater) electronics in the self-test.