Maytag dryer
Maytag dryer error codes
Browse Maytag dryer error codes with practical explanations for airflow, venting, heating, and sensor-related warnings.
Errors
3
High severity
2
Browse all 3 dryer codes
See the full Maytag dryer error code list with code, meaning, severity, and direct links to the detail pages.
Common Maytag dryer codes
AF
Maytag Dryer Error AF: Restricted Airflow or Vent Blockage
Maytag dryer error AF usually means the exhaust vent is restricted and airflow is no longer strong enough for safe drying.
Open AF guide
L2
Maytag Dryer Error L2: Low or No Line Voltage on Leg 2
Electric dryers in North America run on a 240-volt circuit made up of two 120-volt legs. L2 means the dryer is not receiving the correct voltage on the second leg (Leg 2). The dryer may run but produces no heat, or may not run at all. This is a power supply issue — either the circuit breaker has partially tripped, a fuse in the panel has blown, or there is a wiring fault in the outlet or supply cable.
Open L2 guide
PF
Maytag Dryer Error PF: Power Failure
The dryer detected a power interruption during a cycle. PF is an informational display — it tells you the cycle did not complete because power was lost. The dryer is now operational and waiting for you to restart or resume the cycle.
Open PF guide
Symptom entry points
Drain and standing water problems
- AF - Maytag dryer error AF usually means the exhaust vent is restricted and airflow is no longer strong enough for safe drying.
Model-family guidance
What can vary by model
- Maytag dryers may also show F4E3 or F4 E3 for the same basic airflow problem.
- The vent path is an installation issue as much as an appliance issue, so the full duct route matters, not just the dryer itself.
- Maytag dryer display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Maytag dryer error codes?
Start with the dryer overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Maytag dryer codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Maytag support or a qualified technician.
Which dryer codes are covered in this section?
This Maytag dryer section currently includes AF, L2, PF and related variants based on the current content set.