fixthiserror_

Full Error Code List

Maytag refrigerator error codes

Use this page when you already know the display code or want to compare Maytag refrigerator meanings quickly by severity.

How to use this list

Use the table to confirm the exact code, then open the detail guide for the safest first checks, model notes, and next-step options.

What the list is best for

  • Matching the exact display code before you act.
  • Comparing severity and meaning side by side.
  • Spotting closely related warnings that users often confuse.

What happens on the detail page

  • Quick answer and severity guidance.
  • Symptom-based first checks where the content supports it.
  • Model and display notes plus trust and source context.

Maytag refrigerator code table

Scan by code, meaning, and severity, then open the exact detail page when you need step-by-step guidance.

F3E1
Maytag refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
medium severity
F3E2
Maytag refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
medium severity
F3E4
The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.
medium severity
F3E8
The thermistor positioned at the freezer evaporator coil — used to measure the temperature of the coil itself, not the air in the compartment — is reading outside normal range. This affects the control board's ability to manage the cooling cycle.
medium severity
F3E9
The thermistor positioned at the fresh food evaporator coil (on models with a dedicated fresh food cooling circuit) is reading outside acceptable range. The control board cannot accurately regulate cooling in the fresh food section.
medium severity
F3EC
The sensor that measures the ambient room temperature around the refrigerator is reading outside expected range. The control board uses this reading to adjust compressor and fan speed for room conditions. A faulty ambient sensor can cause the refrigerator to run inefficiently.
medium severity
F4E1
Maytag refrigerator error F4E1 usually means the defrost heater circuit is not working as expected.
medium severity
F6E1
The control board has detected a communication fault with the ice maker assembly or the water inlet valve. The ice maker may stop producing ice, or the water dispenser may stop working. Refrigeration is not affected.
medium severity
F8E1
The evaporator fan motor in the freezer compartment has failed or is not operating within expected speed parameters. This fan circulates cold air from the evaporator coil throughout the freezer and often the fresh food compartment. Without it running, temperatures will rise in both sections.
medium severity
F8E2
Maytag refrigerator error F8E2 usually means one of the cooling fans is not moving air properly.
medium severity
F8E8
The compressor — the heart of the refrigerant circuit — has failed or is not operating within acceptable parameters. Without a functioning compressor, the refrigerant cannot circulate and the refrigerator will lose all cooling ability in both compartments. This is a major mechanical failure requiring professional service.
high severity
PO
The refrigerator is displaying PO to indicate that a power outage occurred while it was unattended. The display is alerting the owner to check food safety — the temperature may have risen during the outage. This is an informational indicator, not a mechanical fault.
low severity

Common symptom shortcuts

These clusters give users another way into the list when they know the symptom but not the code.

Leaks, fill, and water-path issues

  • F6E1 - The control board has detected a communication fault with the ice maker assembly or the water inlet valve. The ice maker may stop producing ice, or the water dispenser may stop working. Refrigeration is not affected.

Door, latch, and lock warnings

  • F3E1 - Maytag refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
  • F3E2 - Maytag refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
  • F3EC - The sensor that measures the ambient room temperature around the refrigerator is reading outside expected range. The control board uses this reading to adjust compressor and fan speed for room conditions. A faulty ambient sensor can cause the refrigerator to run inefficiently.

Sensor and temperature faults

  • F3E1 - Maytag refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
  • F3E2 - Maytag refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
  • F3E4 - The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.

Common guides to open next

F3E1 fix guide

F3E1 - Maytag refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.

F3E2 fix guide

F3E2 - Maytag refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.

F3E4 fix guide

F3E4 - The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.

F3E8 fix guide

F3E8 - The thermistor positioned at the freezer evaporator coil — used to measure the temperature of the coil itself, not the air in the compartment — is reading outside normal range. This affects the control board's ability to manage the cooling cycle.