Maytag washing machine
Maytag washing machine error codes
Understand Maytag washing machine error codes with likely causes, safe first checks, and clear next steps when the warning keeps returning.
Errors
16
High severity
0
Browse all 16 washing machine codes
See the full Maytag washing machine error code list with code, meaning, severity, and direct links to the detail pages.
Common Maytag washing machine codes
dET
Maytag Washing Machine Error dET: Detergent Cartridge Not Detected
The washer expected to find a detergent cartridge in the dispenser but could not detect one. This code appears on models with an automatic detergent dispensing system (such as the Load & Go dispenser). The washer will not start the cycle until the cartridge issue is resolved.
Open dET guide
drn
Maytag Washing Machine Error drn: Not Draining
The washer attempted to drain but water remains in the tub after the drain cycle completed. This code appears on top-load HE models and is the functional equivalent of F9E1 on front-load models.
Open drn guide
F5E2
Maytag Washing Machine Error F5E2: Door Lock Failure
The washer's control board attempted to lock the door but did not receive confirmation that the lock engaged within the allowed time. The cycle cannot start until the door locks securely.
Open F5E2 guide
F7E1
Maytag Washing Machine Error F7E1: Motor Speed Sensing Error
The control board is not receiving a valid speed signal from the motor. The motor may be running but the tachometer (speed sensor) is not reporting correctly, or the motor itself has stalled.
Open F7E1 guide
F8E1
Maytag Washer Error F8E1: Washer Not Filling Fast Enough
Maytag washer error F8E1 usually means the machine is not getting enough incoming water to fill on time.
Open F8E1 guide
F8E2
Maytag Washing Machine Error F8E2: Dispenser System Problem
The washer cannot dispense detergent or fabric softener correctly. The dispenser motor or the mechanism that routes water through the detergent compartments has failed or is obstructed.
Open F8E2 guide
Symptom entry points
Drain and standing water problems
- drn - The washer attempted to drain but water remains in the tub after the drain cycle completed. This code appears on top-load HE models and is the functional equivalent of F9E1 on front-load models.
- F9E1 - The washer started a drain cycle but could not empty the drum within 8 minutes. The machine has stopped to prevent motor damage and flooding.
Leaks, fill, and water-path issues
- drn - The washer attempted to drain but water remains in the tub after the drain cycle completed. This code appears on top-load HE models and is the functional equivalent of F9E1 on front-load models.
- F8E1 - Maytag washer error F8E1 usually means the machine is not getting enough incoming water to fill on time.
- F8E2 - The washer cannot dispense detergent or fabric softener correctly. The dispenser motor or the mechanism that routes water through the detergent compartments has failed or is obstructed.
Door, latch, and lock warnings
- F5E2 - The washer's control board attempted to lock the door but did not receive confirmation that the lock engaged within the allowed time. The cycle cannot start until the door locks securely.
- Int - The current wash cycle was paused or cancelled — either by pressing the Pause/Cancel button, by a power interruption, or by the lid/door being opened mid-cycle on some models. This is a status indicator, not a fault.
- LdL - On top-load HE washers, the lid must lock before the spin cycle can start for safety. The washer attempted to lock the lid but did not receive confirmation that the lock engaged.
Model-family guidance
What can vary by model
- Maytag washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Maytag washer fill behavior varies by series, especially on models that monitor both hot and cold inlets closely.
- Some panels show the same no-fill fault with alternate display wording, so compare the exact characters on your console before ordering parts.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Maytag washing machine error codes?
Start with the washing machine overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Maytag washing machine codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Maytag support or a qualified technician.
Which washing machine codes are covered in this section?
This Maytag washing machine section currently includes dET, drn, F5E2, F7E1, F8E1, F8E2, F9E1, HC, Int, LdL, LOC, Ofb, OL, PF, rL, Sud and related variants based on the current content set.