fixthiserror_

MAYTAG Int

Maytag Washing Machine Error Int: Cycle Paused or Cancelled

Clear meaning, realistic next steps, and safe guidance without turning the page into a long repair manual.

What it means

The current wash cycle was paused or cancelled — either by pressing the Pause/Cancel button, by a power interruption, or by the lid/door being opened mid-cycle on some models. This is a status indicator, not a fault.

Severity

Low - usually safe to check with basic user-accessible cleaning or inspection on the Maytag washing machine.

Can you fix it yourself?

Yes — DIY-safe

Most likely cause

Pause/Cancel button pressed accidentally or intentionally

Estimated time for safe first checks: Under 1 min.

Step-by-Step DIY Fix Guide

  1. SAFETY: Disconnect power before inspecting this appliance.
  2. Press Start/Pause once to resume the interrupted cycle from where it stopped.
  3. If you want to restart from the beginning, press Pause/Cancel twice to drain the drum, then select a new cycle and press Start.
  4. If Int appeared after a power outage, restore power, wait 30 seconds, then press Start — many models resume automatically.

If the door warning comes back

  • If the door closes normally but the warning keeps returning, the latch or switch path becomes more likely than a simple alignment issue.
  • Int appears repeatedly mid-cycle without any button presses or power interruptions — possible Start/Pause button or control board fault

What This Error Means

Error Int on your Maytag washing machine means: The current wash cycle was paused or cancelled — either by pressing the Pause/Cancel button, by a power interruption, or by the lid/door being opened mid-cycle on some models. This is a status indicator, not a fault. The washer's self-diagnostic system has detected this condition and paused the current cycle.

The most frequent cause is pause/cancel button pressed accidentally or intentionally. Work through the causes and fix steps below in order — most Maytag washer errors are resolved without a service call.

Error Int is DIY-safe. No tools are required and the fix typically takes under 15 minutes. Follow all steps in sequence.

The washer will not proceed until the condition is resolved. Work through all steps before contacting a certified appliance technician.

Most Likely Cause by Symptom

The Maytag washing machine may stop, pause, or refuse to complete the cycle normally.

Likely cause: Pause/Cancel button pressed accidentally or intentionally

Check first: SAFETY: Disconnect power before inspecting this appliance.

The appliance may fail to start because the door or lock state cannot be confirmed.

Likely cause: Door or lid opened mid-cycle

Check first: Press Start/Pause once to resume the interrupted cycle from where it stopped.

Common Causes

  • Pause/Cancel button pressed accidentally or intentionally
  • Door or lid opened mid-cycle
  • Brief power interruption during a cycle

What Not to Do

  • Do not unplug the washer while Int is displayed if the drum still has water — use Pause/Cancel to drain first

Model and Display Variation Notes

Model-family notes

  • Maytag washing machine display wording and code formats can vary by series.
  • If your model behaves differently, check the owner manual before trying any deeper maintenance step.

Display and panel differences

  • Panel wording can vary by series, so confirm the exact code pattern before buying parts.

Parts, Tools and Service Options

Manual and model check

Check your exact model and manual before ordering any Maytag washing machine parts.

This section stays model-first because exact manual and parts matching matters more than a generic replacement suggestion here.

When Not to Keep Troubleshooting

Int appears repeatedly mid-cycle without any button presses or power interruptions — possible Start/Pause button or control board fault

How to Prevent It Recurring

  • Plug the washer into a surge-protected outlet — brief power fluctuations can trigger Int and interrupt cycles

Related Error Codes

Extra notes

  • This page is based on Maytag support material and stays conservative where model-specific guidance may vary.
  • The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.

Source and model notes

Last reviewed: 2026-04-08

Based on: Based on Maytag support material and edited into consumer-safe guidance for the exact code family on this page.

View Maytag US Official Support

Model coverage note: Maytag washing machine code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.

Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.

Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.