Miele dishwasher
Miele dishwasher error codes
Find Miele dishwasher error code meanings, likely causes, and safe first-step guidance for drain, leak, and fill issues.
Errors
9
High severity
2
Browse all 9 dishwasher codes
See the full Miele dishwasher error code list with code, meaning, severity, and direct links to the detail pages.
Common Miele dishwasher codes
F01
Miele Dishwasher Error F01: NTC Sensor Short-Circuit — Heating Disabled
The dishwasher has detected a short-circuit in the NTC water temperature sensor. Heating has been deactivated and rinse aid dispensing may be affected. The machine cannot confirm water temperature and has stopped the cycle.
Open F01 guide
F11
Miele Dishwasher Error F11: Water Cannot Drain
The dishwasher is unable to drain water from the wash cabinet. Water is still present in the tub at the end of a drain cycle. This applies to Miele G 1xxx through G 6xxx series models.
Open F11 guide
F12
Miele Dishwasher Error F12: Water Intake Issue at Program Start
The dishwasher failed to fill with water at the beginning of a program step. The machine did not detect sufficient water entering the tub within the expected time.
Open F12 guide
F13
Miele Dishwasher Error F13: Water Inlet Valve Defective
The dishwasher's water inlet valve has been identified as defective. The valve is not opening or closing correctly, preventing the dishwasher from filling normally.
Open F13 guide
F14
Miele Dishwasher Error F14: Heater Pressure Switch Issue
The dishwasher has detected a fault with the heater pressure switch. This switch monitors water level in relation to the heating element, and a fault here prevents safe heating operation.
Open F14 guide
F18
Miele Dishwasher Error F18: Flow Meter Stationary — Insufficient Water Flow
The dishwasher's flow meter is reading zero or near-zero water flow when the machine expects water to be entering. The machine has stopped because it cannot confirm water is reaching the wash system.
Open F18 guide
Symptom entry points
Drain and standing water problems
- F11 - The dishwasher is unable to drain water from the wash cabinet. Water is still present in the tub at the end of a drain cycle. This applies to Miele G 1xxx through G 6xxx series models.
- F600 - The dishwasher has detected a fault with the AutoDos automatic detergent dispensing system. The drain pump activates and the wash program is cancelled when this code appears. AutoDos is Miele's built-in automatic powder detergent system.
Leaks, fill, and water-path issues
- F01 - The dishwasher has detected a short-circuit in the NTC water temperature sensor. Heating has been deactivated and rinse aid dispensing may be affected. The machine cannot confirm water temperature and has stopped the cycle.
- F11 - The dishwasher is unable to drain water from the wash cabinet. Water is still present in the tub at the end of a drain cycle. This applies to Miele G 1xxx through G 6xxx series models.
- F12 - The dishwasher failed to fill with water at the beginning of a program step. The machine did not detect sufficient water entering the tub within the expected time.
Sensor and temperature faults
- F01 - The dishwasher has detected a short-circuit in the NTC water temperature sensor. Heating has been deactivated and rinse aid dispensing may be affected. The machine cannot confirm water temperature and has stopped the cycle.
Model-family guidance
What can vary by model
- Miele dishwasher display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Miele dishwasher error codes?
Start with the dishwasher overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Miele dishwasher codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Miele support or a qualified technician.
Which dishwasher codes are covered in this section?
This Miele dishwasher section currently includes F01, F11, F12, F13, F14, F18, F24, F78, F600 and related variants based on the current content set.