Step-by-Step DIY Fix Guide
- SAFETY: Disconnect power before accessing the AutoDos dispenser.
- Open the dishwasher door and locate the AutoDos dispenser in the door panel.
- Remove the AutoDos cartridge by pressing the release button and pulling it out.
- Inspect the dispensing outlet for blockage — use a damp cloth or soft brush to clear any solidified detergent residue.
- Check the cartridge fill level — replace it if empty.
- Reseat the cartridge firmly until it clicks into position.
- Plug in and restart the program.
If it's still not draining
- If the drain path looks clear but the code returns, the issue is more likely in the pump path or another less accessible restriction.
- F600 persists after replacing the cartridge and clearing the dispensing outlet
What This Error Means
Error F600 on your Miele dishwasher means: The dishwasher has detected a fault with the AutoDos automatic detergent dispensing system. The drain pump activates and the wash program is cancelled when this code appears. AutoDos is Miele's built-in automatic powder detergent system. The dishwasher's self-diagnostic system has detected this condition and stopped or interrupted the current cycle.
The most frequent cause is autodos cartridge is empty — the machine cannot dispense detergent and reports a dispensing fault. Work through the causes and fix steps below in order — many Miele dishwasher errors can be resolved without a service call.
Many cases of F600 can be resolved by the homeowner. The steps below cover the full DIY checks — if they do not resolve the error, a Miele-certified technician is needed.
AutoDos errors are almost always caused by an empty or improperly seated cartridge. Check the cartridge first — it takes less than two minutes and resolves the majority of F600 errors.
Most Likely Cause by Symptom
The Miele dishwasher may stop, pause, or refuse to complete the cycle normally.
Likely cause: AutoDos cartridge is empty — the machine cannot dispense detergent and reports a dispensing fault
Check first: SAFETY: Disconnect power before accessing the AutoDos dispenser.
Water may remain inside the appliance instead of clearing normally.
Likely cause: AutoDos cartridge improperly seated — the cartridge is not clicked fully into the dispenser housing
Check first: Open the dishwasher door and locate the AutoDos dispenser in the door panel.
Common Causes
- AutoDos cartridge is empty — the machine cannot dispense detergent and reports a dispensing fault
- AutoDos cartridge improperly seated — the cartridge is not clicked fully into the dispenser housing
- Dispensing outlet blocked — solidified detergent residue is blocking the outlet nozzle
What Not to Do
- Do not force the AutoDos cartridge into the dispenser — if it does not click in easily, check for debris in the housing first
Model and Display Variation Notes
Model-family notes
- Miele dishwasher display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
Display and panel differences
- Panel wording can vary by series, so confirm the exact code pattern before buying parts.
Parts, Tools and Service Options
Common parts
- AutoDos detergent cartridge (replacement cartridge if empty) ()
- AutoDos dispenser module if dispensing mechanism has failed ($60-$150)
Manual and model check
Check your exact model and manual before ordering any Miele dishwasher parts.
Service option
Miele service visit if the warning returns after the basic checks are complete.
Suggestions in this section are organized to support the troubleshooting flow first. Any future affiliate relationships should be disclosed clearly.
When Not to Keep Troubleshooting
F600 persists after replacing the cartridge and clearing the dispensing outlet
How to Prevent It Recurring
- Check the AutoDos cartridge level monthly — running out of detergent mid-program causes F600 and leaves dishes unwashed
Extra notes
- This page is based on Miele support material and stays conservative where model-specific guidance may vary.
- The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.
Source and model notes
Last reviewed: 2026-04-09
Based on: Based on Miele support material and edited into consumer-safe guidance for the exact code family on this page.
View Miele USA Official Support
Model coverage note: Miele dishwasher code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.
Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.
Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.