Step-by-Step DIY Fix Guide
- SAFETY: Disconnect power before checking water supply connections.
- Locate the water supply line at the back of the refrigerator — confirm it is connected and the shut-off tap is fully open.
- Check the water filter status on the control panel or refer to the owner manual for filter replacement interval.
- Replace the water filter if it is overdue — a clogged filter is a common cause of ice maker faults.
- Reset the ice maker according to your owner manual (typically hold the reset button for 10 seconds).
- Restore power and allow 24 hours for the ice maker to resume production.
- If ICE or 01_22_F persists after filter replacement and reset, contact Miele service.
If it's still not filling correctly
- If normal household water flow looks good but the code returns, the inlet-valve or fill-sensing path becomes more likely.
- ICE persists after water supply is confirmed connected, filter is replaced, and ice maker is reset
What This Error Means
Error ICE on your Miele refrigerator means: The refrigerator has detected a fault with the ice maker. The ice maker has stopped producing ice and is reporting an error. This code may also appear as 01_22_F on some Miele models. Also displayed as 01_22_F on some Miele models. The refrigerator's self-diagnostic system has detected this condition.
The most frequent cause is water supply line not connected or tap not open — the ice maker has no water supply. Work through the causes and fix steps below.
Many cases of ICE can be resolved by the homeowner. The steps below cover the full DIY checks — if they do not resolve the error, a Miele-certified technician is needed.
Ice maker faults are low-urgency — the refrigerator and freezer continue to cool normally. Start with the water supply and filter checks before calling a technician. Most ice maker faults are resolved by a filter replacement or supply connection fix.
Most Likely Cause by Symptom
The Miele refrigerator may stop, pause, or refuse to complete the cycle normally.
Likely cause: Water supply line not connected or tap not open — the ice maker has no water supply
Check first: SAFETY: Disconnect power before checking water supply connections.
Performance may drop because airflow, filtering, or draining is restricted.
Likely cause: Water filter overdue for replacement — a clogged filter restricts flow to the ice maker
Check first: Locate the water supply line at the back of the refrigerator — confirm it is connected and the shut-off tap is fully open.
Common Causes
- Water supply line not connected or tap not open — the ice maker has no water supply
- Water filter overdue for replacement — a clogged filter restricts flow to the ice maker
- Ice maker sensor fault — the sensor monitoring ice production has developed an error
What Not to Do
- Do not attempt to disassemble the ice maker module without disconnecting the water supply and power first
Model and Display Variation Notes
Model-family notes
- Miele refrigerator display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as ICE, 01_22_F.
Display and panel differences
- Some control panels show this issue as ICE, 01_22_F instead of only ICE.
- Panel wording and whether the code appears with letters, numbers, or a longer variant can differ by model family.
Parts, Tools and Service Options
Common parts
- Water filter replacement (per Miele schedule — typically every 6 months) ()
- Ice maker assembly if unit has failed ($80-$180)
- Water inlet valve for ice maker if valve has failed ($40-$100)
Manual and model check
Check your exact model and manual before ordering any Miele refrigerator parts.
Service option
Miele service visit if the warning returns after the basic checks are complete.
Suggestions in this section are organized to support the troubleshooting flow first. Any future affiliate relationships should be disclosed clearly.
When Not to Keep Troubleshooting
ICE persists after water supply is confirmed connected, filter is replaced, and ice maker is reset
How to Prevent It Recurring
- Replace the water filter on Miele's recommended schedule — a partially clogged filter reduces ice maker flow before triggering an error
Extra notes
- This page is based on Miele support material and stays conservative where model-specific guidance may vary.
- The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.
Source and model notes
Last reviewed: 2026-04-09
Based on: Based on Miele support material and edited into consumer-safe guidance for the exact code family on this page.
View Miele USA Official Support
Model coverage note: Miele refrigerator code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.
Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.
Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.