Miele washing machine
Miele washing machine error codes
Understand Miele washing machine error codes with likely causes, safe first checks, and clear next steps when the warning keeps returning.
Errors
14
High severity
2
Browse all 14 washing machine codes
See the full Miele washing machine error code list with code, meaning, severity, and direct links to the detail pages.
Common Miele washing machine codes
F1
Miele Washing Machine Error F1: NTC Temperature Sensor Short-Circuit
The washer has detected a short-circuit in the NTC temperature sensor. The machine cannot accurately measure water temperature and has stopped the cycle to prevent damage.
Open F1 guide
F10
Miele Washing Machine Error F10: Water Inlet Blocked or Restricted
The washer is not receiving adequate water. The drum did not fill to the required level within the allotted time, indicating a restriction in the water supply.
Open F10 guide
F11
Miele Washing Machine Error F11: Drain Restricted
The washer attempted to drain during the cycle but water was not fully expelled within the expected time. A restriction somewhere in the drain path is preventing proper drainage.
Open F11 guide
F15
Miele Washing Machine Error F15: Fault in Hot Water Intake
The washer has detected a fault with the hot water supply connection. The machine cannot draw hot water as expected, which may affect wash performance on temperature-sensitive cycles.
Open F15 guide
F16
Miele Washing Machine Error F16: Excess Detergent Detected
The washer has detected excessive suds in the drum. Too much foam prevents the drum from spinning safely and rinsing laundry properly. The machine may run extra rinse cycles to clear the suds before displaying F16.
Open F16 guide
F19
Miele Washing Machine Error F19: Slow Flow Meter — Water Flow Sensor Fault
The washer's flow meter is detecting water entering the machine more slowly than expected. The machine pauses the cycle because the fill rate is below the minimum threshold required for safe operation.
Open F19 guide
Symptom entry points
Drain and standing water problems
- F11 - The washer attempted to drain during the cycle but water was not fully expelled within the expected time. A restriction somewhere in the drain path is preventing proper drainage.
- F19 - The washer's flow meter is detecting water entering the machine more slowly than expected. The machine pauses the cycle because the fill rate is below the minimum threshold required for safe operation.
Leaks, fill, and water-path issues
- F1 - The washer has detected a short-circuit in the NTC temperature sensor. The machine cannot accurately measure water temperature and has stopped the cycle to prevent damage.
- F10 - The washer is not receiving adequate water. The drum did not fill to the required level within the allotted time, indicating a restriction in the water supply.
- F11 - The washer attempted to drain during the cycle but water was not fully expelled within the expected time. A restriction somewhere in the drain path is preventing proper drainage.
Door, latch, and lock warnings
- F34 - The washer has detected a problem with the door locking mechanism. The machine cannot confirm the door is properly secured and has stopped or will not start the cycle.
- F35 - The washer door has locked during a cycle and cannot be unlocked by the normal mechanism. The machine has stopped the cycle and is reporting that the door release has failed.
- F37 - The washer has detected a fault specifically in the door unlock mechanism. The machine cannot release the door lock after the cycle, indicating a failure in the solenoid or wiring responsible for unlocking.
Model-family guidance
What can vary by model
- Miele washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as Locked. Enter code, LOCKED.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Miele washing machine error codes?
Start with the washing machine overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Miele washing machine codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Miele support or a qualified technician.
Which washing machine codes are covered in this section?
This Miele washing machine section currently includes F1, F10, F11, F15, F16, F19, F20, F29, F34, F35, F37, F51, F53, LOCKED and related variants based on the current content set.