Can you keep using it?
Can you keep using it?
Contact customer support if any of these apply
- !The message persists even after re-enabling the setting.
- !The printer no longer saves or applies paper setup settings correctly.
What to check first
Step-by-step checks
- 1
Consumable check
Re-enable Paper Setup Auto Display in printer settings if you rely on automatic media detection.
Start with the official recovery step before moving on to parts or deeper servicing.
- 2
Safe first step
Review print settings manually if you prefer to keep the option off.
- 3
Safe first step
Retry the affected workflow after restoring the setting if needed.
Background
What this message usually means
Epson shows this message when Paper Setup Auto Display is disabled on the ET-5800/5850/5880 family. Epson notes that some media-aware features may not behave as expected until the setting is turned back on.
Diagnosis
Likely causes
Paper Setup Auto Display was disabled in printer settings.
A settings change turned off paper auto-detection behavior.
The printer is warning that some media-aware features are now limited.
Service
When service or replacement is more likely
- -This is a settings-state warning, not a printer hardware fault.
See also
Related codes in this family
Explore more
More Epson printer families
Keep browsing
Where to go next
Source notes
Epson's ET-5800/5850/5880 guide notes that some features may not be available when Paper Setup Auto Display is turned off.
Built around Epson's ET-5800/5850/5880 official user-guide status and troubleshooting guidance. Exact wording can vary slightly by firmware and installed options.
Printer error codes can vary a little by firmware, region, and exact model variant. Use this guide as a family-level starting point and stop if the next step would require disassembly or service-mode changes.
Known family variants: ET-5800, ET-5850, ET-5880
Last reviewed: 2026-04-12
Reference: Open reference