fixthiserror_

WHIRLPOOL PF

Whirlpool Range/Oven Error PF: Power Failure — Clock Reset Required

Clear meaning, realistic next steps, and safe guidance without turning the page into a long repair manual.

What it means

The range has detected that power was interrupted — either from an outage, a tripped breaker, or the range being accidentally unplugged. PF is displayed to alert the user to reset the clock. This is an informational indicator, not a fault.

Severity

Low - usually safe to check with basic user-accessible cleaning or inspection on the Whirlpool oven.

Can you fix it yourself?

Yes — DIY-safe

Most likely cause

Power outage cut power to the range

Estimated time for safe first checks: 1–2 min.

Step-by-Step DIY Fix Guide

  1. SAFETY: No hazard — PF is an informational display code.
  2. Press Cancel or Clock on the control panel to acknowledge and clear the PF alert.
  3. Reset the clock to the correct time using the Clock or Settings button.
  4. If a timed bake or delay start was in progress when the outage occurred, it will need to be re-entered.
  5. If PF displays with no known power outage, check the circuit breaker for the range circuit — a partial trip may be causing intermittent power loss.

If the door warning comes back

  • If the door closes normally but the warning keeps returning, the latch or switch path becomes more likely than a simple alignment issue.
  • PF appears repeatedly with no known outages — intermittent power supply fault suspected

What This Error Means

Error PF on your Whirlpool range/oven means: The range has detected that power was interrupted — either from an outage, a tripped breaker, or the range being accidentally unplugged. PF is displayed to alert the user to reset the clock. This is an informational indicator, not a fault. The range's self-diagnostic system has detected this condition.

The most frequent cause is power outage cut power to the range. Work through the causes and fix steps below before calling a technician.

Error PF is DIY-safe. No tools are required. Follow the steps below to clear this mode.

Control lock is a useful safety feature for homes with children, but it is easy to activate accidentally while cleaning the panel. Once locked, no buttons will respond — not even the Cancel or Off buttons on most models. A 3-second hold on the Lock button is the standard way to exit, but check your owner manual for the exact sequence for your model.

Most Likely Cause by Symptom

The Whirlpool oven may stop, pause, or refuse to complete the cycle normally.

Likely cause: Power outage cut power to the range

Check first: SAFETY: No hazard — PF is an informational display code.

Common Causes

  • Power outage cut power to the range
  • Circuit breaker for the range tripped
  • Range power cord accidentally unplugged or partially disconnected
  • Utility company voltage fluctuation causing a momentary power loss

What Not to Do

  • Do not leave PF unacknowledged indefinitely — some models will not allow oven operation while PF is active

Model and Display Variation Notes

Model-family notes

  • Whirlpool oven display wording and code formats can vary by series.
  • If your model behaves differently, check the owner manual before trying any deeper maintenance step.

Display and panel differences

  • Panel wording can vary by series, so confirm the exact code pattern before buying parts.

Parts, Tools and Service Options

Manual and model check

Check your exact model and manual before ordering any Whirlpool oven parts.

This section stays model-first because exact manual and parts matching matters more than a generic replacement suggestion here.

When Not to Keep Troubleshooting

PF appears repeatedly with no known outages — intermittent power supply fault suspected

How to Prevent It Recurring

  • If power outages are frequent in your area, consider a whole-home surge protector at the electrical panel — voltage spikes on power restoration can damage range control boards over time

Related Error Codes

Extra notes

  • This page is based on Whirlpool support material and stays conservative where model-specific guidance may vary.
  • The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.

Source and model notes

Last reviewed: 2026-04-08

Based on: Based on Whirlpool support material and edited into consumer-safe guidance for the exact code family on this page.

View Whirlpool US Official Support

Model coverage note: Whirlpool oven code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.

Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.

Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.